SUPECONDUCTING MAGNET SYSTEM
PM-FT-10
This is a system which generates magnetic field on a flat table.
Since the magnet-applying space is open and is not limited spatially, the system can be used for various purposes.
●Magnetic field can be applied by placing samples on the flat table, or by approximating the flat table to the sample.
●Helium as coolant is not required, since conduction cooling method is adopted with the use of GM cryocooler (1 unit).
●NbTi superconducting magnet is used as the magnetic field generator. The maximum magnetic field applicable is 3.4T
at the center of the flat table.
●Rotating mechanism allows the direction of the magnetic field to rotate from perpendicular to horizontal.
FHTS-10
This is layered pancake-shaped coils using high temperature superconducting wire. Cooling the coils in liquid nitrogen
for the superconductive condition allows applying high current to coils and generation of strong magnetic field.
[Product Examples]
●Generated magnetic field: More than 0.3T (Coil axis center, in perpendicular direction)
※ Designed value at rated time. Will vary depending on operating current.
●Standard outer dimension: φ 280mm × height 80mm (excluding the projecting part)
●Standard valid room-temperature bore dimension: φ 70mm
★ The specification and appearance of the products in this web-page are subject to change without notice for improvement in quality and performance.
Copyright (C) 2012 Fujihira Co., Ltd. Japan All Rights Reserved
- Back to Index -
Phone: +81-29-875-8401 Fax: +81-29-875-8402
URL: www.fujihira-gr.co.jp
E-mail: info2@fujihira-gr.co.jp